• CHEMICAL ANALYSERS

    AIR QUALITY AND ODOR MONITORING

ambient odour emission monitoring, chemical analyser,, detection of odorous gases,, odour measurement, plant emission, manufacture odour, industrial odour, agricultural odour

SL50, SCENTINAL

Compact Air Quality and odour Monitoring Station

Scentinal provides ambient odour emission monitoring based on high accuracy (ppb level) detection of odorous gases such as H2S, Ammonia, VOCs, and SO2. The flexible intelligent station allows live monitoring of plant emissions on Scentroid’s cloud servers. Odour emission is reported in OU/m3 based on correlation determined based on periodic measurements using field olfactometry.

  • Monitor numerous air contaminants simultaneously
  • Monitor more than 60 Volatile Organic Compounds
  • Monitor Particulates PM1, 2.5, and PM10
  • Monitor total Odour levels
  • Create alarms and notifications
  • Monitor efficiency and functionality of odour mitigation equipment
  • Monitor process emissions

DR1000 Flying Laboratory

DR1000 flying laboratory, Drone environmental monitoring

The Scentroid DR1000 can be used to sample and analyze ambient air at heights of up to 150 meters above ground level that was previously impossible to accomplish. Air quality mapping, model verification, analysis of potentially dangerous sites are all made possible by this novel innovation.

The DR1000 Flying laboratory provides a robust platform to conduct impact assessment and air quality measurement for a wide range of applications including monitoring of:

  • Fugitive emission
  • Flare emission
  • Leak detection along oil pipe lines
  • Landfill methane and odour emission
  • And much more!
ambient odour emission monitoring, chemical analyser,, detection of odorous gases,, odour measurement, plant emission, manufacture odour, industrial odour, agricultural odour, drone

DR300, Flying Laboratory

DR300 flying laboratory, Drone environmental monitoring

Scentroid DR300 Sampling drone adds a new dimension to air sampling. The DR300 Sampling drone can be used to sample ambient air at heights of up to 125 meters above ground level or directly sample from stack plumes. Height sampling and direct plume sampling opens a new avenue that can be used to increase accuracy of emission and impact assessment.

Manufacturer :SCENTROID
Model :Scentroid DR300 Sampling Drone
Maximum flight time: 25 minutes
Average number of samples in one round :5 samples with one fully charged battery
Time to fill up a sample bag :45 seconds
Sampling drone weight :1360 g
Diagonal length: 580 mm
Sampling drone battery: 5200mAh LiPo Battery
Max flight speed: 15m/s
Max tilt angle: 35°
Operating frequency: 2.4GHz ISM
Remote battery: Li-Po Battery, 3.7V 2000mAH
Working voltage: 120 mA@6V
Drone positioning accuracy Vertical: 0.8m / Horizontal: 2.5m

ambient odour emission monitoring, chemical analyser,, detection of odorous gases,, odour measurement, plant emission, manufacture odour, industrial odour, agricultural odour, drone

ODOTRACKER TR8

Scentroid OdoTracker is a multi-sensor device that measures the concentrations of two chemicals in ambient air at the same time. The chemicals to be measured by the device are specified at the time of ordering. For example the user may specify the measurement of Hydrogen Sulphide (H2S) in ppb level and Ammonia (NH3) in ppm level. The instrument logs the chemical measurements as well as temperature and humidity of the sample, GPS location and automatically transfers all data to the user’s supplied smart Android device via Bluetooth.

  • Measure ambient H2S, Ammonia, Total VOC, and other chemical concentrations
  • Determine H2S, Ammonia, VOCs, and other chemicals emissions from various types of sources
  • Determine emission trends through 24+ hour data logging
  • Verify sample loss due to transportation
  • Validate dispersion models through emission measurements
ambient odour emission monitoring, chemical analyser,, detection of odorous gases,, odour measurement, plant emission, manufacture odour, industrial odour, agricultural odour, drone

TR8+ Pollutracker

Scentroid Pollutracker TR8+ is a complete air quality mobile laboratory. This instrument allows the user to measure hundreds of chemicals using up to 10 sensors and analyzers including Photo-Ionization Detectors (PID) sensors, Non-dispersive Infrared (NDIR) sensors, Electrochemical and Metal Oxide sensors. Pollutracker includes, Built-in 10″ touchscreen interface, On device data logging and wireless transfer via email, Remote (internet based) firmware update, Built in sampling pump, Simultaneous data analysis of all gases, Built-in rechargeable battery, On-screen Calibration Procedure and External decontamination device.

  • Measure ambient H2S, Ammonia, Total VOC, and other chemical concentrations
  • Determine H2S, Ammonia, VOCs, and other chemicals emissions from various types of sources
  • Determine emission trends through 24+ hour data logging
  • Verify sample loss due to transportation
  • Validate dispersion models through emission measurements

Request a Quote

4 + 4 = ?

This contact form is deactivated because you refused to accept Google reCaptcha service which is necessary to validate any messages sent by the form.